Modeling and Simulation of Pipeline Security Monitoring System Based on LineStructure Sagnac Interferometer with 3×3 Coupler
Article
Figures
Metrics
Preview PDF
Reference
Related
Cited by
Materials
Abstract:
The third damage action, human disruption behavior, is one of the major threats to pipeline operation. It is necessary to monitor and locate the perturbation behavior that may threat pipeline safety in realtime. Therefore, a new pipeline security monitoring system is designed by using linestructure Sagnac optic fiber interferemeter with the characteristic of 3×3 coupler that can modulate the phase of optic signal, with no need for phase modulation and demodulation. The optic structure of the new system is simplified, the signal processing accuracy is improved, and the polarization effect is reduced. The working principle of the monitoring in ideal condition is described, the phase demodulation is analyzed and the location of the possible damage action point is formulated. By using simulink, the optic signal propagation and interference is simulated and interference signals in different frequencies are obtained. The results validate the feasibility of the monitoring system and indicate that the low frequency signal less than 1 kHz resulting from the human damage action can be detected. The disturbance set at 10 km can be located by calculating the demodulation signal accurately over a long monitoring distance.
Keywords:
Project Supported:
the National Natural Science Foundation of China (No.51235001) and the Beijing Natural Science Foundation (No.1122005)
He Cunfu. Modeling and Simulation of Pipeline Security Monitoring System Based on LineStructure Sagnac Interferometer with 3×3 Coupler[J]. Transactions of Nanjing University of Aeronautics & Astronautics,2015,32(3):312-317